 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MITSUBISHI INTELLIGENT POWER MODULES PM100CSA120 FLAT-BASE TYPE INSULATED PACKAGE A B AA - DIA. (4 TYP.) H Y AC W W W RY AC Y Z V 12 3 4 5678 9 11 13 15 17 19 T Q Q 10 12 14 16 18 AE (15 TYP.) F EC B J AB - THD (6 TYP.) 1. V UPC 2. UFO 3. U P 4. V UPI 5. V VPC 6. VFO 7. V P 8. V VPI 9. V WPC 10. WFO 11. W P 12. V WPI 13. V NC 14. V NI 15. NC 16. U N 17. V N 18. W N 19. FO P N W U V W AH AH Z G M D M S Z Z Y 2.54 MM DIA. (2 TYP.) 0.5 MM SQ. PIN (19 TYP.) AF AG X P AD U N L K V WPC WP W FO V WPI V UPC UP U FO V UPI V VPC VP V FO V VPI V NC WN FO NC VNI VN UN Description: Mitsubishi Intelligent Power Modules are isolated base modules designed for power switching applications operating at frequencies to 20kHz. Built-in control circuits provide optimum gate drive and protection for the IGBT and free-wheel diode power devices. Features: Complete Output Power Circuit Gate Drive Circuit Protection Logic - Short Circuit - Over Current - Over Temperature - Under Voltage Millimeters 17.5 16.5 13.2 11.0 10.0 8.0 7.25 6.0 Dia. 5.5 M5 3.22 2.6 2.0 1.8 1.6 0.5 Sep.1998 Type PM Current Rating Amperes 100 VCES Volts (x 10) 120 OUT VCC OUT VCC OUT VCC OUT VCC OUT VCC GND GND GND GND GND GND GND GND GND GND GND GND TEMP SI SI SI SI SI NC N W V U SI OUT VCC FO FO FO FO FO FO IN IN IN IN IN IN P Outline Drawing and Circuit Diagram Dimensions A B C D E F G H J K L M N P Q R Inches 5.310.04 4.740.02 4.330.04 4.27 3.760.02 3.29 2.01 1.602 1.54 1.37 1.33 1.02 Millimeters 135.01.0 120.50.5 110.01.0 108.5 95.50.5 83.5 51.0 40.68 39.0 34.7 33.7 26.0 Dimensions S T U V W X Y Z AA AD AC AD AE AF AG AH Inches 0.69 0.65 0.52 0.43 0.39 0.31 0.285 0.24 0.22 Dia. Metric M5 0.128 0.10 0.08 0.07 0.06 0.02 Applications: Inverters UPS Motion/Servo Control Power Supplies Ordering Information: Example: Select the complete part number from the table below -i.e. PM100CSA120 is a 1200V, 100 Ampere Intelligent Power Module. 0.95 +0.06/-0.0 24.1 +1.5/-0.0 0.84 0.79 0.780 21.3 20.0 19.82 MITSUBISHI INTELLIGENT POWER MODULES PM100CSA120 FLAT-BASE TYPE INSULATED PACKAGE Absolute Maximum Ratings, Tj = 25C unless otherwise specified Ratings Power Device Junction Temperature Storage Temperature Case Operating Temperature Mounting Torque, M5 Mounting Screws Mounting Torque, M5 Main Terminal Screws Module Weight (Typical) Symbol Tj Tstg TC -- -- -- PM100CSA120 -20 to 150 -40 to 125 -20 to 100 1.47 ~ 1.96 1.47 ~ 1.96 920 800 2500 Units C C C N*m N*m Grams Volts Vrms Supply Voltage Protected by OC and SC (VD = 13.5 - 16.5V, Inverter Part, Tj = 125C) VCC(prot.) Isolation Voltage (Main Terminal to Baseplate, AC 1 min.) Viso Control Sector Supply Voltage (Applied between VUP1-VUPC, VVP1-VVPC, VWP1-VWPC, VN1-VNC) Input Voltage (Applied between UP-VUPC, VP-VVPC, WP-VWPC, UN * VN * WN-VNC) Fault Output Supply Voltage (Applied between UFO-VUPC, VFO-VVPC, WFO-VWPC, FO-VNC) Fault Output Current (Sink Current of UFO, VFO, WFO and FO Terminal) VD VCIN VFO IFO 20 20 20 20 Volts Volts Volts mA IGBT Inverter Sector Collector-Emitter Voltage (VD = 15V, VCIN = 15V) Collector Current, (TC = 25C) Peak Collector Current, (TC = 25C) Supply Voltage (Applied between P - N) Supply Voltage, Surge (Applied between P - N) Collector Dissipation VCES IC ICP VCC VCC(surge) PC 1200 100 200 900 1000 595 Volts Amperes Amperes Volts Volts Watts Sep.1998 MITSUBISHI INTELLIGENT POWER MODULES PM100CSA120 FLAT-BASE TYPE INSULATED PACKAGE Electrical and Mechanical Characteristics, Tj = 25C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Control Sector Over Current Trip Level Inverter Part Short Circuit Trip Level Inverter Part Over Current Delay Time Over Temperature Protection OC SC toff(OC) OT OTr Supply Circuit Under Voltage Protection UV UVr Supply Voltage VD ID Vth(on) Vth(off) fPWM IFO(H) IFO(L) Minimum Fault Output Pulse Width tFO -20C T 125C, VD = 15V -20C T 125C, VD = 15V VD = 15V Trip Level Reset Level Trip Level Reset Level Applied between VUP1-VUPC, VVP1-VVPC, VWP1-VWPC, VN1-VNC Circuit Current VD = 15V, VCIN = 15V, VN1-VNC VD = 15V, VCIN = 15V, VXP1-VXPC Input ON Threshold Voltage Input OFF Threshold Voltage Applied between UP-VUPC, VP-VVPC, WP-VWPC, UN * VN * WN-VNC PWM Input Frequency Fault Output Current 3- Sinusoidal VD = 15V, VFO = 15V VD = 15V, VFO = 15V VD = 15V -- -- -- 1.0 15 -- 10 1.8 20 0.01 15 -- kHz mA mA ms -- -- 1.2 1.7 40 13 1.5 2.0 55 18 1.8 2.3 mA mA mA mA 145 -- -- 111 -- 11.5 -- 13.5 230 340 10 118 100 12.0 12.5 15 -- -- -- 125 -- 12.5 -- 16.5 Amperes Amperes s C C Volts Volts Volts Sep.1998 MITSUBISHI INTELLIGENT POWER MODULES PM100CSA120 FLAT-BASE TYPE INSULATED PACKAGE Electrical and Mechanical Characteristics, Tj = 25C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units IGBT Inverter Sector Collector Cutoff Current ICES VEC VCE(sat) VCE = VCES, Tj = 25C VCE = VCES, Tj = 125C Diode Forward Voltage Collector-Emitter Saturation Voltage -IC = 100A, VD = 15V, VCIN = 0V VD = 15V, VCIN = 15V, IC = 100A VD = 15V, VCIN = 15V, IC = 100A, Tj = 125C Inductive Load Switching Times ton trr tC(on) toff tC(off) VD = 15V, VCIN = 0 15V VCC = 600V, IC = 100A Tj = 125C 0.5 -- -- -- -- 1.0 0.15 0.4 2.5 0.7 2.5 0.3 1.0 3.5 1.2 s s s s s -- -- -- -- -- -- -- 2.5 2.5 2.2 1.0 10 3.5 3.5 3.2 mA mA Volts Volts Volts Thermal Characteristics Characteristic Junction to Case Thermal Resistance Symbol Rth(j-c)Q Rth(j-c)F Contact Thermal Resistance Rth(c-f) Condition Each IGBT Each FWDi Case to Fin Per Module, Thermal Grease Applied Min. -- -- -- Typ. -- -- -- Max. 0.21 0.35 0.018 Units C/Watt C/Watt C/Watt Recommended Conditions for Use Characteristic Supply Voltage Symbol VCC VD Input ON Voltage Input OFF Voltage VCIN(on) VCIN(off) fPWM tdead Condition Applied across P-N Terminals Applied between VUP1-VUPC, VN1-VNC, VVP1-VVPC, VWP1-VWPC Applied between UP-VUPC, VP-VVPC, WP-VWPC, UN * VN * WN-VNC PWM Input Frequency Minimum Dead Time Using Application Circuit Input Signal 5 ~ 20 3.0 kHz s 0 ~ 0.8 4.0 ~ VD Volts Volts Value 0 ~ 800 15 1.5 Units Volts Volts Sep.1998 MITSUBISHI INTELLIGENT POWER MODULES PM100CSA120 FLAT-BASE TYPE INSULATED PACKAGE SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) OUTPUT CHARACTERISTICS (TYPICAL) 3 COLLECTOR-EMITTER SATURATION VOLTAGE VCE(sat), (VOLTS) SATURATION VOLTAGE VCE(sat), (VOLTS) 3 COLLECTOR CURRENT, IC, (AMPERES) 120 100 80 60 40 20 0 0 12 14 16 18 20 0 1 2 3 SUPPLY VOLTAGE, VD, (VOLTS) COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) VD = 15V VCIN = 0V Tj = 25oC Tj = 125oC Tj = 25oC VCIN = 0V VD = 17V 15 2 2 13 1 1 VD = 15V VCIN = 0V Tj = 25oC Tj = 125oC 0 0 40 80 120 COLLECTOR CURRENT, IC, (AMPERES) 0 SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL) REVERSE RECOVERY CURRENT VS. COLLECTOR CURRENT (TYPICAL) 101 101 VCC = 600V VD = 15V SWITCHING TIMES, tc(on), tc(off), (s) 100 Irr 102 REVERSE RECOVERY CURRENT, Irr, (AMPERES) SWITCHING TIMES, ton, toff, (s) Inductive Load toff Tj = 25oC Tj = 125oC REVERSE RECOVERY TIME, trr, (s) trr 100 ton VCC = 600V VD = 15V Inductive Load 100 tc(off) tc(on) 10-1 VCC = 600V VD = 15V Inductive Load Tj = 25oC Tj = 125oC 101 Tj = 25oC Tj = 125oC 10-1 101 102 COLLECTOR CURRENT, IC, (AMPERES) 103 10-1 101 102 COLLECTOR CURRENT, IC, (AMPERES) 103 10-2 101 102 100 103 COLLECTOR REVERSE CURRENT, -IC, (AMPERES) DIODE FORWARD CHARACTERISTICS OVER CURRENT TRIP LEVEL VS. SUPPLY VOLTAGE (TYPICAL) OVER CURRENT TRIP LEVEL TEMPERATURE DEPENDENCY (TYPICAL) COLLECTOR REVERSE CURRENT, -IC, (AMPERES) 102 OVER CURRENT TRIP LEVEL % (NORMALIZED) 120 OVER CURRENT TRIP LEVEL % (NORMALIZED) 120 Tj = 25oC VD = 15V VCIN = 15V Tj = 25oC Tj = 125oC 110 110 100 100 101 90 90 80 80 VD = 15V 100 0 0.5 1.0 1.5 2.0 2.5 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) 0 0 12 14 16 18 20 SUPPLY VOLTAGE, VD, (VOLTS) 0 -50 0 50 100 150 JUNCTION TEMPERATURE, Tj, (oC) Sep.1998 MITSUBISHI INTELLIGENT POWER MODULES PM100CSA120 FLAT-BASE TYPE INSULATED PACKAGE FAULT OUTPUT PULSE WIDTH VS. TEMPERATURE (TYPICAL) CONTROL SUPPLY VOLTAGE TRIP-RESET LEVEL TEMPERATURE DEPENDENCY (TYPICAL) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (Each IGBT) TRANSIENT IMPEDANCE, Zth(j-c), (NORMALIZED VALUE) 120 FAULT OUTPUT PULSE WIDTH % (NORMALIZED) 15 VD = 15V UVt UVr 101 100 UV TRIP-RESET LEVEL, UVt, UVr, (VOLTS) 14 100 80 13 10-1 60 12 40 11 10-2 SINGLE PULSE STANDARD VALUE = Rth(j-c)Q = 0.21oC/W 0 -50 0 50 100 150 JUNCTION TEMPERATURE, Tj, (oC) 0 -50 0 50 100 150 JUNCTION TEMPERATURE, Tj, (oC) 10-3 10-3 10-2 10-1 TIME, (s) 100 101 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (Each FWDi) TRANSIENT IMPEDANCE, Zth(j-c), (NORMALIZED VALUE) 101 100 10-1 10-2 SINGLE PULSE STANDARD VALUE = Rth(j-c)F = 0.35oC/W 10-3 10-3 10-2 10-1 TIME, (s) 100 101 Sep.1998 |
Price & Availability of PM100CSA120
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |